General: Pure Epoxy Powder Coatings(powder paint)-JC100 series products mainly use dicyandiamide ashardnener, used in indoor applications. It has good anti-corrosion property.JC100 series have various colors, glossy & surface conditions to meet customerrequirements. Application Areas: Piping & Rebar anti-corrosion, Electrical Insulation, Capacitance, Machinery, LaboratoryEquipment, Automotive coil springs, Brake pads, Cable ducting, and tools. PowderProperties:Chemical Type: Pure EpoxyParticle Size: Suitable for electrostatic paintingSpecific Gravity: 1.2-1.8 g/cm3 (depending on pigmentation)Storage Condition: Keep in cool & dry placeValidity: 6 months (25°C)Products Code: JC100 SeriesCuring Condition: 200°C 10min. / 180°C 15min. TestingConditions:Checked under laboratory conditions. Actual product performance may varydue to product specific properties such as gloss, color, effect and finish aswell as application related and environmental influences.Substrate: Iron sheetPretreatment: Zinc PhosphatingFilm Thickness: 50um (Recommended film thickness: 50-70um)Curing Condition: 200°C 10min. /180°C 15min.Propeties TestsTest MethodTest ResultPhysical Flexibility BS3900-E11 3mm max. Cross Cut Test BS3900-E6 (1mm width) 0 class Cupping Test BS3900-E4 7mm Good Pencil Hardness ASTM D3363 >= 1H Impact Test ASTM D2794 >= 50 cm·kg Chemical Salt Spray Test ASTM B117 (1000h) 2mm max. Determination of resistance to Humidity BS3900-F2 (1000h) No blistering or loss of gloss Soaked in distilled water Test BS3900-F7 (240h) No blistering or loss of gloss Anti-chemicals (tested by normal acid, alkali, oil, solvents under room tempeture.) Good Note of Pretreatment: All the steel substrate should be degreased, the ferrousmetals should be zinc or iron phosphating, aluminum recommendedchromating, to improve corrosion resistance.Coating Method:JC100 series powder can be coated by manual or auto electrostatic spray guns.(or a tribostatic process as for option). it can be cycle used with a proper recyclesystem.